51
Your WTMD has a separate relay outputs and Modem/RS232 output for PC. You may monitor the
cases of alarm from a distance. For details See Section 3.6
*My WTMD generates an alarm constantly. What should I do?
Make sure that this is not related with any adjustments made over the necessary sensitivity level in
consideration of environment. Do not forget that in high sensitivity adjustments, your WTMD can
detect any metals from key chains to a metal part of a shoe and all these detection may cause false
alarms. Make sure that the adjusted sensitivity level is above the value measured in environment
noise level.
*The traffic lights on the back of the WTMD are flashing red and green continuously.
What should I do?
There is no proper ground/earth connection on the mains line of your WTMD. Have the connection
checked and normalise the ground.
* The lights on the back of the WTMD are red all the time. What should I do?
Make sure that the mounting of the WTMD is made correctly, that the side panels are parallel and
the distance in between is 74 cms and the connector connections are made properly.
*The WTMD is not detecting under any circumstances. What should I do?
Make sure that the connectors are plugged correctly and the ON/OFF Switch on the main card is
ON position. Check whether there is any soldering failure or break off inside the connectors or
wires.
*The WTMD is not giving an audio signal. What should I do?
Make sure the sound and tone are not shut off. Check the settings unit. Check the loudspeaker
inside the Control Unit. See Section 4.1.4
10. APPENDIX
10.1 CERTIFICATE OF EXPERTISE
Certificate of Expertise, certifies that the ThruScan taken, in random from the
production line of Elektral® A.S, conforms to the general test criteria and matches the standards
envisioned throughout the world.
The Magnetic Field Strength of ThruScan, appears much lower than
have been stated by FDA. With the VLF technology, with its special
Rx, Tx coils design and programming which minimize nil points. Thus
it has an improved detection capability in comparison to its
counterparts. It is further certified that it complies with the related
instructions of NILECJ and FDA.
ThruScan is compatible with VDE standards for noise radiation.
Furthermore, it is certified that ThruScan sX/sX-i, complies with IEC
348 IP 44; ThruScan sX-WP, complies with IEC 348 and IP 55.
The best technological components were used for your ThruScan and
much attention was paid for the certification of these components
that were as in EU and CE directives.
10.2 SRC-SCADA REMOTE CONTROL
It is extremely easy to use the SRC-SCADA Remote Control Software. In this Windows based
software, there is a “?” icon next to every button, to “HELP” the function of the button.
In Section 10.2.1 you may see the ThruScan s3/s6/s9 SRC SCADA Software, and in Section 10.2.2
ThruScan sX/sX-WP/s15-i/sX-i, SRC SCADA Software user manuals.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce